FujiClean CE Series, Manual

Page: 6 / 47

Section 3a. System Components and Specifications
–
CEN Summary
* Please consult with distributor or Fuji Clean USA for commercial models designed to treat hydraulic flows
above those listed in this table.
** Please consult with distributor or Fuji Clean USA for system specification and sizing in cases where influent
biologic strength is greater than domestic strength.
FUJI CLEAN USA
CEN SYSTEM
SPECIFICATION TABLE
CEN Series
BOD, TSS,
and
Enhanced TN
Model CEN5 CEN7 CEN10
CEN21
Load Hydraulic* (GPD) 450 630 900 1,900
Effluent** (assumes domestic strength influent)
BOD (mg/L) 10 10 10 10
TSS (mg/L) 10 10 10 10
TN (mg/L) 10 10 10 10
Blower Model / CFM (Standard)
FujiMAC80RII
2.8 CFM
FujiMAC100RII
2.8 CFM
FujiMAC100RII
3.5 CFM
FujiMAC200RII
7.0 CFM
Power Use (kWh/day) 1.1 1.6 1.6 3.4
Tank Detail:
Material
Fibre-reinforced plastic
Height (inches) 65.7 73.6 77.4
87.2
Length (inches) 95.7 98.8 118.9
183.7
Width (inches) 49.2 56.7 68.9
78.3
Weight (lbs.) 463 705 926
1,543
Inlet Invert (inches, to 1/8”)
53 61 62
71
Outlet Invert (inches to
1/8”)
51 59 59.5
69
Access Ports (number) 3 3 3
3
Access Port Diameter (inches)
2@20”
1@24”
2@20”
1@24”
2@20”
1@24”
2@20”
1@24”
Volume Total (gallons) 749 1069 1498
3,199
Vol. Chamber 1, Sedimentation (gal) 277 397 558 873
Vol. Chamber 2, Anaerobic(gal)
278 396 556 839
Vol. Chamber 3, Aeration (gal)
127 181 248 378
Vol. Chamber 3a, Storage (gal)
63 90 124 186
Vol. Chamber 3b, Disinfection (gal)
4 6 12 12
4