FujiClean CE Series, Manual

Page: 25 / 47

Installation Procedure

Step 1: Prepare excavation to be at least 1 to 2 feet
larger than Fuji Clean system dimensions as listed below.
I porta t Note: Riser height should ot e eed .

“tep . Prepare
-
ed of sto e
(
¼ to ½ , le el to ithi / .
Unloading Instructions:

Upon delivery, inspect Fuji Clean tank, both outside and inside for possible damage incurred during
transport. If you find damage, or have a question, please contact your distributor immediately.
Use 4-point
lifting lugs

Step 3: Carefully lower and set
tank. Level to within 1/8-inch.
CEN Series
,
BOD, TSS,
and
Enhanced TN
Model CEN5 CEN7 CEN10 CEN21
Load Hydraulic* (GPD) 450 630 900 1,900
Blower Model / CFM (Standard)
FujiMAC80RII
2.8 CFM
FujiMAC100RII
2.8 CFM
FujiMAC100RII
3.5 CFM
FujiMAC200RII
7.0 CFM
Power Use (kWh/day) 1.1 1.6 1.6
3.4
Tank Detail:
Height (inches) 65.7 73.6 77.4
87.2
Length (inches) 95.7 98.8 118.9
183.7
Width (inches) 49.2 56.7 68.9
78.3
Weight (lbs.) 463 705 926
1,543
Inlet Invert (inches, to 1/8”)
53 61 62
71
Outlet Invert (inches to
1/8”)
51 59 59.5
69
Access Ports (number) 3 3 3
3
Access Port Diameter (inches)
2@20”
1@24”
2@20”
1@24”
2@20”
1@24”
2@20”
1@24”
23