26
Installing of Print Drivers for Windows Computers
13
Click [Print a test page] if you want to check that the printer is successfuly installed, and click [Finish].
14
Confirm that the printer has been added in the [Printers] window.
This completes the installation of the print driver. Remove the CD-ROM from the drive.
After the installation is complete, all the optional accessories that are installed to the printer must be set up. Display
the properties dialog box of the printer, select the [Configuration] tab, and display [Installable Options] to set up.
For information about how to display the [Configuration] tab, refer to
Display the Device Settings Tab and
For information about how to configure the printer, refer to
Windows Device Options and Print Driver Settings on
Store your CD-ROM in a safe place.
Using [Add a printer] and Installing
- Windows 7/Windows Server 2008 R2
This section describes the installation procedure for Windows 7 and Windows Server 2008 R2. In this section,
Windows 7 is used as an example.
NOTE:
• To cancel the installation of the print driver during installation, click [Cancel] in the dialog box. You can also click the [Returns
to previous page] icon to delete the settings in that dialog box and return to the previous dialog box.
1
Start Windows 7.
NOTE:
• Make sure that you are logged on as an Administrator.
2
On the [Start] menu, select [Devices and Printers].
3
In the [Devices and Printers] window, select [Add a printer].
4
Select how the printer is connected to the computer.
If the printer is connected directly to your computer or to the network in a TCP/IP (LPD) environment, select
[Add a local printer].
5
Select the port you are using, and click [Next].
When the printer is connected in a TCP/IP (LPD) environment:
a
Select [Create a new port].
b
Select [Standard TCP/IP Port] in the [Type of port] list, and click [Next].
c
Enter the IP address of the printer in [Hostname or IP address], and click [Next].
d
When [Additional port information required] is displayed, select the series name of the model being used
with [Standard] of [Device Type] and click [Next].
When using a USB port:
When using a USB port, select [LPT1] here. When installation of the print driver completes, set the USB port.
See Using the USB Port on page 31
to configure the USB port.
The screen for selecting the model and the manufacturer of the printer is displayed.
Summary of Contents for DocuPrint CM405 df
Page 1: ...DocuPrint CM405 df CP405 d PostScript User Guide...
Page 6: ...6 Using This Guide...
Page 92: ...92 Barcode Settings...
