22
Installing of Print Drivers for Windows Computers
Installing Local Printers
This section describes how to specify a USB port of the computer that the printer is connected to and install the print
driver by following the procedure below. Since printer options are not set automatically, set them with the printer
properties dialog after installing.
NOTE:
• To cancel the installation of the print driver during installation, click [Cancel] in the dialog box. You can also click [Back] to
delete the settings in that dialog box and return to the previous dialog box.
1
Start Windows 7.
NOTE:
• Log in as Administrator or as an user within the Administrator group. Refer to the Windows 7 documentation for details
about the Administrator group.
2
Insert the PostScript Driver Library CD in the CD-ROM drive.
The [AutoPlay] dialog box is displayed.
3
Click [Run Launcher.exe].
NOTE:
• If the [User Account Control] dialog box appears, click [Yes] to continue the installation.
The [PostScript Printer Driver Version Check Tool] screen is displayed.
4
Click [Next] and follow the on-screen instructions until the [Setup] screen of the "Driver Installation Tool" is
displayed.
5
Click [Custom].
The [Select Connection Method] screen is displayed.
6
Select [Local Printer], and click [Next].
The [Local Printer] screen is displayed.
7
Select a USB port that the printer is connected to from [Port] and the model from [Model], and click [Next].
The [Software License Agreement] screen is displayed.
NOTE:
• For printers added by this method, you cannot acquire the status of the printer or the status of documents the user has
instructed to be printed, even if you use "Document Monitor".
8
Read through the license agreement carefully and if you have no objections to it, select [Yes], then click
[Install].
Installation begins.
The graphic of the printer being added, and the address or model name of the printer being installed are
displayed.
When setup completes, the [Setup Complete] screen is displayed.
9
Click [Properties].
The printer's [Properties] dialog box is displayed.
10
Select the [Configuration] tab, set the option settings, and click [OK] to close the [Properties] dialog box.
For details about option settings, see
Configuration Tab Settings on page 48
11
Click [Test Page].
The test print page is printed from the printer.
12
Click [Finish].
A confirmation message is displayed.
13
Click [Yes].
This completes the installation of the print driver.
Summary of Contents for DocuPrint CM405 df
Page 1: ...DocuPrint CM405 df CP405 d PostScript User Guide...
Page 6: ...6 Using This Guide...
Page 92: ...92 Barcode Settings...
