Installing of Print Drivers for Windows Computers
17
13
Click [Yes].
This completes the installation of the print driver.
Installing Printers Connected to a TCP/IP Network
This section describes how to specify and install LPR (TCP/IP) printers by following the procedure below.
NOTE:
• To cancel the installation of the print driver during installation, click [Cancel] in the dialog box. You can also click [Back] to
delete the settings in that dialog box and return to the previous dialog box.
1
Start Windows 7.
NOTE:
• Log in as Administrator or as an user within the Administrator group. Refer to the Windows 7 documentation for details
about the Administrator group.
2
Insert the PostScript Driver Library CD in the CD-ROM drive.
The [AutoPlay] dialog box is displayed.
3
Click [Run Launcher.exe].
NOTE:
• If the [User Account Control] dialog box appears, click [Yes] to continue the installation.
The [PostScript Printer Driver Version Check Tool] screen is displayed.
4
Click [Next] and follow the on-screen instructions until the [Setup] screen of the "Driver Installation Tool" is
displayed.
5
Click [Custom].
The [Select Connection Method] screen is displayed.
6
Select [LPR(TCP/IP) Printer], and click [Next].
The [LPR(TCP/IP) Printer] screen is displayed.
Printers connected to LPD and TCP/IP within the same subnet are detected, and a list is displayed in [Printers
found].
7
From [Printers found], select your printer model, and click [Next].
A dialog box confirming installation is displayed.
NOTE:
• If the printer to be used is not displayed in [Printers found], because of your computing environment, execute the
following operations.
When using IPv4 (Internet Protocol Version 4):
If you know the host name or IP address, select [IP Address] or [Host Name], and directly enter the host name or IP
address. Enter the IP address in the format "X.X.X.X" (enter a number 255 or lower for "X", and do not omit periods).
To search for printers, click [Search Scope], and specify the IP subnet address. You can confirm the IP address of the
printer by printing a System Settings page (for the DocuPrint CM405 df) or Printer Settings page (for the DocuPrint
CP405 d). For details, refer to the manual contained in the Driver CD Kit.
When using IPv6 (Internet Protocol Version 6):
Select [IP Address] or [Host Name], and directly enter the host name or IP address. To specify the IP address of a printer
on another subnet, be sure to specify a global address.
You cannot search for printers specifying a search range.
8
Confirm the settings, and select [Yes].
The [Software License Agreement] screen is displayed.
Summary of Contents for DocuPrint CM405 df
Page 1: ...DocuPrint CM405 df CP405 d PostScript User Guide...
Page 6: ...6 Using This Guide...
Page 92: ...92 Barcode Settings...
