20
Installing of Print Drivers for Windows Computers
4
Click [Next] and follow the on-screen instructions until the [Setup] screen of the "Driver Installation Tool" is
displayed.
5
Click [Custom].
The [Select Connection Method] screen is displayed.
6
Select [Shared Printer] and click [Next].
The [Shared Printer] screen is displayed.
7
Enter the name of the printer in [Share Name] in the format "\\computer name\shared printer name", or click
[Browse] and select the shared printer on the screen displayed.
8
Click [Next].
The [Software License Agreement] screen is displayed.
NOTE:
• If the printer specified cannot be confirmed, the [Printer Specification] screen is displayed.
Enter [IP Address], [Host Name] or [IPX Address],
or
select [Model], and click [Next]. A confirmation message is
displayed, and click [Yes].
9
Read through the license agreement carefully and if you have no objections to it, select [Yes], then click
[Install].
Installation begins.
The graphic of the printer being added, and the address or model name of the printer being installed are
displayed.
When setup completes, the [Setup Complete] screen is displayed.
10
Click [Properties].
The printer's [Properties] dialog box is displayed.
11
Select the [Configuration] tab, set the option settings, and click [OK] to close the [Properties] dialog box.
For details about option settings, see
Configuration Tab Settings on page 48
12
Click [Test Page].
The test print page is printed from the printer.
13
Click [Finish].
A confirmation message is displayed.
14
Click [Yes].
This completes the installation of the print driver.
Using Existing Ports and Installing
This section describes how to specify existing ports of computers and install printers by following the procedure
below. Since printer options are not set automatically, set them with the printer properties after installing.
NOTE:
• To cancel the installation of the print driver during installation, click [Cancel] in the dialog box. You can also click [Back] to
delete the settings in that dialog box and return to the previous dialog box.
1
Start Windows 7.
NOTE:
• Log in as Administrator or as an user within the Administrator group. Refer to the Windows 7 documentation for details
about the Administrator group.
2
Insert the PostScript Driver Library CD in the CD-ROM drive.
The [AutoPlay] dialog box is displayed.
Summary of Contents for DocuPrint CM405 df
Page 1: ...DocuPrint CM405 df CP405 d PostScript User Guide...
Page 6: ...6 Using This Guide...
Page 92: ...92 Barcode Settings...
