Fuji Xerox DocuCentre-III 2007 Administrator'S Manual Download Page 43 | Manualshive

Page: 43 / 503

Fuji Xerox DocuCentre-III 2007 Administrator'S Manual Download Page 43

Replacing Consumables

41

M

ai

n

te

na
nc
e

3

Replacing the Drum Cartridge (for customers having a spot maintenance
contract)

The drum cartridge is a customer replaceable unit. The machine will display a warning

message before the drum reaches the end of life. Order a replacement cartridge now

to insure continuous operation.

*1 Based on the following conditions: (1) 1-sided copying (not printing), (2) average number of pages

copied at one time: 3 pages, (3) paper size: A4 LEF ( ), (4) paper tray: Tray 1, (5) output tray:
Center Output Tray. The values are for reference only and will be affected also by other machine-
usage conditions, such as how often the machine is turned on and off. Note that the page yield may
be half or less of these values under some conditions.

Important •

The use of drum cartridges not recommended by Fuji Xerox may impair quality and
performance. Use only drum cartridges recommended by Fuji Xerox.

Note

•

Do not expose drum cartridges to direct sunlight or strong light from indoor fluorescent
lighting. Do not touch or scratch the surface of the drum cartridge. Doing so may result in
unsatisfactory printing.

•

Used drum cartridges require proper disposal. Return all used toner cartridges to our
Customer Support Center.

•

Replace the drum cartridge while the machine is switched on. If the power is turned off, all
information stored to the machine's memory will be erased.

Message

Number of Pages

*1

Solution

Please order a Drum
Cartridge.

DocuCentre-III 3007: 4,500 pages
DocuCentre-III 2007: 4,000 pages

The drum cartridge does
not need to be replaced
yet. Get a spare of the
displayed drum cartridge.

Drum Cartridge needs to
be replaced soon.

DocuCentre-III 3007: 1,350 pages
DocuCentre-III 2007: 1,200 pages

Drum Cartridge needs to
be replaced.

-

Replace the drum
cartridge with a new one.

CAUTION

z

Keep the drum cartridges and toner cartridges out of the reach of children. If a child
accidentally swallows toner, spit it out, rinse mouth with water, drink water and
consult a physician immediately.

z

When replacing drum cartridges and toner cartridges, be careful not to spill the
toner. In case of any toner spills, avoid contact with clothes, skin, eyes and mouth
as well as inhalation.

z

If toner spills onto your skin or clothing, wash it off with soap and water.
If you get toner particles in your eyes, wash it out with plenty of water for at least
15 minutes until irritation is gone. Consult a physician if necessary.
If you inhale toner particles, move to a fresh air location and rinse your mouth with
water.
If you swallow toner, spit it out, rinse your mouth with water, drink plenty of water
and consult a physician immediately.

«
...
41
42
43
44
45
...
»

Summary of Contents for DocuCentre-III 2007
























































































































































































































































































































































































































































































































Reviews:

No comments