Fuji Xerox DocuCentre-III 2007 Administrator'S Manual Download Page 201

Page: 201 / 503

Setting Items Using CentreWare Internet Services

199

Ce
n

tre

War

e Int
e

rnet Ser

vices

Setting

- Kerberos Server Settings
- SMB Server Settings

IP Filtering
Allows you to set the IP addresses that the machine accepts connection from.

Unbounded Port
Allows you to set the unbounded port.

Audit Log
Allows you to enable the Audit Log feature.

Machine Digital Certificate Management
Allows you to have the machine generate a self-signed certificate and to import
certificates.

IPSec
Allows you to configure the IPSec settings.

Certificate Management
Displays the certificates registered with the machine.

Certificate Revocation Retrieval Settings
Allows you to configure the settings for certificate revocation retrieval.

802.1x
Allows you to configure the IEEE 802.1x settings.

SSL/TLS Settings
Allows you to configure SSL/TLS communication and certificate verification.

S/MIME Settings
Allows you to configure the S/MIME settings.

PDF/DocuWorks/XPS Security Settings
Allows you to configure the signature settings for PDF, DocuWorks, and XPS
documents.

Watermark
Allows you to configure the Watermark and PDF settings.

Job Status Default
Allows you to configure the display/hide settings for the status of jobs.

Service Representative Restricted Operation
Allows you to configure the restricted operation settings for the Service
Representative.

System Administrator Settings
Allows you to set the user ID and passcode of the System Administrator.

Summary of Contents for DocuCentre-III 2007























































































































































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-III 2007

Reviews:

Fuji Xerox DocuCentre-III 2007, Administrator'S Manual, Page: 201 / 503

Search results

Summary of Contents for DocuCentre-III 2007

Reviews: