Fax Service Settings
147
T
ools
5
•
There are a maximum of three lines that can be used for G3 communications: line 1, line 2,
and line 4.
•
For each line, you can set a G3 ID (fax number), G3 dialing type, and G3 line type.
•
In accordance with the lines added, either line 2 or line 4, or both lines information can be
specified.
Local Name
Register the name of the local terminal as the local name.
The local name is shown in the recipient's [Activity Report]. However, depending on the
recipient's device, it may not be shown.
Enter up to 20 characters using the keyboard displayed or the numeric keypad.
Company Logo
Register the sender’s name (company logo). Enter up to 30 characters using the keyboard
displayed or the numeric keypad.The sender name is printed in the Transmission Header
Text or Cover Page.
Machine Password
Set the machine password when you want to limit the other parties that can send faxes.
When the machine password is set, only a party that sends the correct machine password by
F code is allowed to send or poll. Note that this means that faxes cannot be accepted from a
fax without the F code feature.
G3 Line - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the local
terminal fax number.
Using the displayed keyboard and the numeric keypad, specify with not more than 20 digits.
Note
•
A G3 ID (fax number) consists of not more than 20 digits, including 0 to 9, +, and space.
G3 Line - Dial Type
Set the dial type.
Tone
Tone dialing line.
10pps
Pulse dialing line.
G3 Line - Line Type
Set the line type.
PSTN
Subscriber telephone line.
PBX
Private branch exchange.
Internet Fax Control
You can make the settings relating to control of Internet fax operation.
Internet Fax Path
Set the Internet Fax communication path.
Via E-mail Server
Sends e-mail through an SMTP server.