Fuji Xerox ApeoSport C5540I Page 86 Quick Reference Manual Download

Page: 86 / 108

6 Problem Solving

Pr
o

S
o

Close the front cover of the finisher.

Note

• A message will be displayed and the machine will not operate if the front cover of the finisher

is even slightly open.

Paper Jams at the Lever 1d and the Wheel 1c

Open the front cover of the finisher.

Move the lever 1d to the left, and
then move the lever 6 upward.

Turn the wheel 1c to the direction
indicated by the arrow, and then
remove the jammed paper.

Return the lever 1d and 6 to the original position.

Close the front cover of the finisher.

Note

• A message will be displayed and the machine will not operate if the front cover of the finisher

is even slightly open.

Paper Jams at the Levers 1a and 1b

Open the front cover of the finisher.

Summary of Contents for ApeoSport C5540I













































































































Search results

Summary of Contents for ApeoSport C5540I

Reviews:

Related manuals for ApeoSport C5540I

Brands by name

Popular brands

Fuji Xerox ApeoSport C5540I, Quick Reference Manual

Search results

Summary of Contents for ApeoSport C5540I

Reviews:

Related manuals for ApeoSport C5540I

Brands by name

Popular brands