Fuji Xerox ApeoSport C5540I, Quick Reference Manual, Page: 47 / 108

Loading Paper
45
Pa
p
e
r
an
d O
the
r M
e
dia
4
Loading Tab Paper
Following describes the procedure for loading tab paper in the Tray 5.
Important • Tab paper cannot be loaded on the Trays 1 to 4 and 6.
• Tab paper can be used only for [Tab Margined Shift], and [Covers/Separators].
1
Open the Tray 5 (bypass).
Note • If necessary, extend the
extension flap. The extension
flap can be extended in two
stages. When pulling out the
extension flap, do it gently.
2
Hold the center of the paper guides
and slide them to the desired paper
size.
3
Load paper with the side to be
copied or printed on facing up and
the top edge frontward, and insert
the paper lightly along the paper
guide until it comes to a stop.
Important • Do not load mixed paper types
into the tray.
• Do not load paper exceeding
the maximum fill line. It may
cause paper jams or machine
malfunctions.