Fuji Xerox ApeoSport C5540I Page 55 Quick Reference Manual Download

Page: 55 / 108

Replacing Consumables

Mai

nan

Remove the toner cartridge by
holding the handle on the top of the
cartridge while gently pulling it out.

Important • Pull out the toner cartridge gently. Otherwise, toner may fly out of the cartridge.

• Return used toner cartridges to our Customer Support Center for disposal.

Take out the new toner cartridge of
the same color as the old one from
its box, and gently tilt the cartridge
up and down, and then left and
right several times.

Insert the toner cartridge in gently
until it comes to a stop.

Note

• Be sure to insert the toner

cartridge until you hear it click
into place.

Close the toner cover.

Warning

Toner remaining in the cartridge
can cause an explosion and you
can get burnt. Never throw a
toner cartridge into an open
flame.

Summary of Contents for ApeoSport C5540I













































































































Search results

Summary of Contents for ApeoSport C5540I

Reviews:

Related manuals for ApeoSport C5540I

Brands by name

Popular brands

Fuji Xerox ApeoSport C5540I, Quick Reference Manual

Search results

Summary of Contents for ApeoSport C5540I

Reviews:

Related manuals for ApeoSport C5540I

Brands by name

Popular brands