Fuji Electric MONITOUCH TS Series Hardware Specifications Download Page 94

Page: 94 / 115

5-36

2. Main Menu Screen

Touch Switch Adjustment

If a position different from the pressed position turns white on the touch switch test screen, follow the
steps described below to adjust the touch switch position.

1. Press the [Adjust] switch on the touch switch test screen. The Touch Switch Adjustment screen

appears.

2. Press on “1” that is flashing at the corner. When

the finger is released, a beep sounds and the
position is set. “2” flashes.

3. Press on “2” that is flashing at the corner. When

the finger is released, a beep sounds and the
position is set. “3” flashes.

4. Press on “3” that is flashing at the corner. When

the finger is released, a beep sounds and the
position is set. “4” flashes.

5. Press on “4” that is flashing at the corner. When

the finger is released, a beep sounds and the
position is set.

6. To re-set the positions, press the

[Reset] switch and follow step 2 and
later.

7. To cancel the setting, press the

[Return] switch. The touch switch
test screen is displayed again.

8. To determine the setting, press the

[Fix] switch. A long beep sounds and
the positions are determined. The
touch switch test screen is displayed
again.

Touch switch test screen

Touch Switch Adjustment screen

Summary of Contents for MONITOUCH TS Series




















































































































Search results

Summary of Contents for MONITOUCH TS Series

Reviews:

Related manuals for MONITOUCH TS Series

Brands by name

Popular brands

Fuji Electric MONITOUCH TS Series, Hardware Specifications

Search results

Summary of Contents for MONITOUCH TS Series

Reviews:

Related manuals for MONITOUCH TS Series

Brands by name

Popular brands