4 Keypad Panel
4-1
FVR-C11S-EN
4
4 Keypad Panel
4-1 Names and Functions
Digital display
In program mode: Shows function codes and data
codes.
In Operation mode: Shows the output frequency
and output current, etc.
In Trip mode: Shows a code indicating the causes
of the trip.
Program (Reset) key
Switches between Operation mode and Program
mode.
In Trip mode: Resets the trip status and change
to Operation mode.
Function/Data key
In Operation mode: Switches between frequency
display and output current display during stopped
and running. In Program mode: Used to read and
write various function codes and function data
items.
Up/down keys
In Operation mode: Used to increase and reduce
the frequency (motor speed).In Program mode:
Used to change a function code and data value.
RUN key
This key is used to start operation.
The LED is on during operation.
This key does not function when the data code
from the external signal (digital input) is selected
(F02 = 1).
STOP key
This key is used to stop operation.
This key does not function when the data code
from the external signal (digital input) is selected
(F02 = 1).
4-2 Operating Keypad Panel
1) Switching monitor
The display can be switched between fre-
quency display and output current display by
pressing the
in Operation mode.
1) Frequency is displayed as a percentage with the least
significant digit in PID control operation (function H20
is set to 1 or 2):
for 10%
for 100%
2) The reference frequency is displayed when the
key is pressed in current indication.
2) Stopping operation
Operation is started when the
is
pressed, and is stopped when the
is
pressed while function
is set to a val-
ue other than
.
The rotation direction is:
=
: Forward rotation with
FWD-P24/CM ON, and
reverse rotation with
REV-P24/CM ON
=
: Forward rotation
(FWD/REV input is ig-
nored.)
=
: Reverse rotation
(FWD/REV input is ig-
nored.)
6 0. 0
1. 2 A
1 0. 0.
1 0 0.
F 0 2
1
F 0 2
0
F 0 2
2
F 0 2
3
Frequency
1)
Current
2)
