8-5
8.1.4 Single-phase 100 V class series
Item
Specifications
Type (FRN_ _ _ _C2S-6U)
0001
0002
0003
0005
Applicable motor rating (HP)
*1
1/8
1/4
1/2
1
Output Ratings
Rated capacity (kVA)
*2
0.26
0.53
0.95
1.6
Rated voltage (V)
*3
Three-phase, 200 to 240 V (with AVR function)
Rated current (A)
0.7
1.4
2.5
4.2
Overload capability
150% of rated output current for 1 min or 200% of rated output
current for 0.5 s
Rated frequency (Hz)
50/60 Hz
Input Ratings
Phases, voltage, frequency
Single-phase, 100 to 120 V, 50/60 Hz
Voltage and frequency
variations
Voltage: +10 to -10%, Frequency: +5 to -5%
Rated current (A)
*6
(w/ DCR)
2.2
3.8
6.4
12.0
(w/o DCR)
3.6
5.9
9.5
16.0
Required power supply
capacity (kVA)
*7
0.3
0.5
0.7
1.3
Braking
Torque (%)
*8
150
100
DC braking
Braking starting frequency
*9
: 0.0 to 60.0 Hz,
Braking time: 0.0 to 30.0 s, Braking level: 0 to 100%
Braking transistor
--
Built-in
Applicable safety standards
UL508C
Enclosure
IP20 (IEC 60529), UL open type (UL50)
Cooling method
Natural cooling
Mass (kg)
0.7
0.7
0.8
1.3
Mass (lbs)
1.5
1.5
1.8
2.9
*1 Fuji 4-pole standard motors
*2 Assuming the rated output voltage as 220 V.
*3 Output voltages cannot exceed the power supply voltage.
*6 Estimated value to apply when the power supply capacity is 500 kVA (inverter capacity x 10 when the inverter
capacity exceeds 50 kVA) and the inverter is connected to the %X = 5% power supply.
*7 Values to apply when a DC reactor (DCR) is used.
*8 Average braking torque to apply when the motor running alone decelerates from 60 Hz with the AVR control
being OFF. (It varies with the efficiency of the motor.)
*9 Available only for induction motor drive.
(Note) When driven by 100 VAC, the single-phase 100 V class series of inverters limits their shaft output
and maximum output torque as listed below. This is to prevent their output voltage from decreasing
when load is applied.
Shaft output (%)
Maximum torque (%)
w/o DC reactor (DCR)
90
150
w/ DC reactor (DCR)
85
120
