- 42 -
INZ-TN1ZSS-E
Note
Set the value so that H-Limit is larger than L-Limit, and that (H-Limit – L-Limit) is larger than hysteresis
width.
6.3.3 Analog output / alarm record
Set the recording range of the external alarm output such as analog output or the alarm record.
Setting range can be selected from “H-Limit”, “L-Limit” and “H/L Limit”. When there are two ranges, the
setting range can be selected from the 6 types of Range1 and Range2.
Note
When “OFF” is set to the ON/OFF setting of the alarm value, “Analog Output / Alarm Record” cannot be
set. Select “ON” again. The alarm output which is outside the range of High/Low limit cannot be per-
formed for 10 minutes after turning on the power.
Point the to “Analog Output / Alarm Record”
by the
key and the
key, and press
the
key.
(
)
Select output range by the
key and the
key, and press the
ENT
key.
(
)
ENT
Alarm Setting
H
-
Limit
ON
Range1
15
ppm
Range2
ppm
L-Limit
ppm
ppm
Hysteresis
%FS
Analog Output
Range1 H-
Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
Alarm Setting
H
-
Limit
ON
Range1
15
ppm
Range2
ppm
L-Limit
ppm
ppm
Hysteresis
%FS
Analog Output
Range1 H-
Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
