- 40 -
INZ-TN1ZSS-E
Select “ON” or “OFF” by the
key or the
key, and press the
key.
(
)
ENT
When “OFF” is selected, the cursor returns to the
“H-Limit”. When “ON” is selected, the
moves to “Range1” of H-Limit or L-Limit, and
set the alarm value. For setting of the alarm val-
ues, refer to “6.3.2 Setting of alarm value”.
6.3.2 Setting of alarm value
Make a setting of the High/Low limit alarm for the measured concentration. To change the alarm setting, set
the Alarm ON/OFF setting to ON, and then change the numeric value.
Note
Point the to “H-Limit” to change the setting of H-Limit value, and point “L-Limit” to change the set-
ting of the L-Limit value.
Point the to “H-Limit” to set the H-limit
value, and point “L-Limit” to set the L-Limit
value, and then press the
key.
(
)
Alarm Setting
H
-
Limit
ON
Range1
15
ppm
Range2
ppm
L-Limit
ppm
ppm
Hysteresis
%FS
Analog Output
Range2 H-
Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
Alarm Setting
H
-
Limit
OFF
Range1
15
ppm
Range2
ppm
L-Limit
ppm
ppm
Hysteresis
%FS
Analog Output
Range2 H-
Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
Alarm Setting
H
-
Limit
OFF
Range1
15
ppm
Range2
ppm
L-Limit
ppm
ppm
Hysteresis
%FS
Analog Output
Range2 H-
Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
