INZ-TN1ZSS-E
- 27 -
5.3.1.4 “Menu” screen
AO Select
2006-04-01
12:00:00
Menu
Zero Calibration
Alarm Log
Display
／
Output
Password
＊＊＊＊＊
Parameter Setting
Span Calibration
Alarm Setting
Input Signal
Output Hold
Press the
MODE
key while the “Measurement” screen is displayed, and the “Menu” screen appears. (It does
not appear when pressing the
MODE
key while other screen is displayed. In that case, Press the
-5+
key to
display the “Measurement” screen, and then press the
MODE
key.)
5.3.1.5 Name (functions)
(1) Zero Calibration ··················· Used when zero calibration is performed.
(2) Span Calibration··················· Used when span calibration is performed.
(3) Alarm Log···························· Displays the alarm occurred in the past.
(4) Alarm Setting ······················· Used for setting range of upper/lower limit alarm or analog output range
of the measurement value.
(5) Output Hold ························· Used for holding analog output.
(6) Parameter Setting ················· Used for setting each parameter.
(7) Display / Output setting ······· Used for setting the measurement value and analog output value to be
displayed on the “Measurement” screen such as switching “Instantane-
ous value / Average value” or “Wet / Dry”.
(8) AO Select ····························· Used when analog input range or fixed value are set for concentration
correction or air purge alarm.
(9) Input Signal·························· Used to determine what to output to the analog output terminal.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
