INZ-TN1ZSS-E
- 39 -
6.3 Alarm setting
Select “Alarm Setting” from the “Menu” screen, and press the
ENT
key. On the “Alarm Setting Gas” screen,
select the measurable component by moving the with the
key and the
key.
Press the
ENT
key after measurable component is selected. “Alarm Setting” screen is displayed.
ENT
6.3.1 Alarm value ON/OFF
ON validates the High/Low limit alarm output setting, alarm display, alarm record for the measured concen-
tration. Select OFF to invalidate.
Note
When ON is selected, “High/Low limit setting”, “Analog Output / Alarm Record” cannot be set.
Point the to “H-Limit” or “L-Limit” by the
key and the
key, and press the
key.
(
)
Alarm Setting Gas
HC
ℓ
Alarm Setting
H-Limit
ON
Range1
15
ppm
Range2
ppm
L-Limit
ppm
ppm
Hysteresis
%FS
Analog Output
Range2 H-
Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
Alarm Setting
H
-
Limit
ON
Range1
15
ppm
Range2
ppm
L-Limit
ppm
ppm
Hysteresis
%FS
Analog Output
Range2 H-Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
