FTS SDI-RAINE-HYDRO, User Manual

Page: 3 / 27

1 Scope of Delivery
•
SDI-RAINE-HYDRO
sensor
• Collecting vessel
• Operating instructions
• USB-to-mini-USB cable
• Software rain[e] -Commander (download
from the FTS Support website (https://support.ftsinc.com)
>Product Documentation>Sensors> SDI-RAINE-HYDRO> Resources.
)
Check the delivery for transport damage
. Document any damage and
contact
FTS Customer Service at
1-800-548-4264 .
2 Order Codes
SDI-RAINE-HYDRO
The order codes for accessories and spare parts can be found in chapter “Equipment and Spare Parts”.
3 Safety Instructions and Warranty
This system is designed according to the state-of-the-art accepted safety regulations. However, please note the
following rules:
1. Before putting into operation please read all respective manuals!
2. Please observe all internal and state-speci
fi c guidelines and/or rules for the prevention of accidents. If
necessary ask your responsible safety representative.
3. Use the system only as described in the manual.
4. Always have the manual at hand at the installation site.
5. Use the system within the speci
fi ed operating condition. Eliminate in fl uences, which might impair the safety.
6. Prevent the ingress of unwanted liquids into the devices.
7. Funnel heating and drain heating can be very hot if the heating is operated with the housing open. There is
a risk of being burnt! It is therefore recommended that the connector of the heating supply be disconnected
during cleaning and maintenance work.
8. The measuring edge of the upper part of the housing is quite sharp. There is a risk of cuts. It is therefore
recommended that the measuring edge not to be pressed on and/or that gloves are worn!
Please note the loss that unauthorised manipulation of the system shall result in the loss of warranty
and non-liability. Changes to system components require express written permission from
FTS
. These
activities must be performed by a quali fi ed technician.
The warranty does not cover:
1. Mechanical damage caused by external impacts (e. g. icefall, rockfall, vandalism).
2. Impacts or damage caused by over-voltage or electromagnetic
fi elds which are beyond the standards and
speci fi cations of the device.
3. Damage caused by improper handling, e. g. by using the wrong tools, incorrect installation, incorrect electrical
installation (incorrect polarity) etc.
4. Damage caused by using the device outside the speci fi ed operation conditions.
3
SDI-RAINE-HYDRO
USER MANUAL
700-SDI-RAINE-HYDRO Rev1 03 Mar 2021
Part# 21184