![background image](http://html.mh-extra.com/html/fsi/professional-series/professional-series_operation-manual_2340916059.webp)
SAFETY AND HANDLING
54
CYLINDERS
Do not attach any member to the cylinder by welding, drilling, tapping, screwing or by any other method
which would affect the cylinder surface.
Report any dents, scratches, rubs or other accidents that appear to have affected the cylinder, especially
in the welded areas.
Do not remove any fittings or hardware from the cylinders.
Do not alter configuration of fittings and hardware.
Do not apply heat to any cylinder by direct contact (i.e. band heaters, etc.).
Do not heat cylinders above the ambient temperature without depressurizing cylinder to 150 PSI.
Heating of cylinders should take place prior to pressurizing.
Do not store cylinders in direct sunlight.
STRATS (FILTERS)
The Strat assembly has canister type filters with removable filter screen barrels.
The filters CANNOT be used interchangeably.
Equipment must be depressurized before servicing or replacing filters. Contact FSI for assistance.
HOSES
Hoses must be handled carefully, especially when not under pressure, because the Teflon tubing can kink
easily. When under pressure this is less likely to happen.
Hoses must not be subjected to bending radii less than nine inches.
Hoses must not be permitted to lie on plant floors because of the heat sink effect and potential damage from
other equipment. Constant scraping of stainless steel braid on concrete also has a detrimental effect.
BALL VALVES
Ball valves are used in many parts of the FSI equipment. Ball valves have been selected to allow the best flow
and the least pressure drop. Ball valves are made with special seals to prevent the reactive chemicals from
damaging their function.
Always open ball valves SLOWLY! This minimizes hydraulic shock and possible damage to equipment.
Handles should not be removed from valves. The position of the valve handle indicates if the valve is open or
closed. Regardless of the shape of the handle, if its long axis is in line with the valve, it is open. If the long axis
is across the valve, it is closed.
Equipment should be depressurized prior to the removing of any ball valves. Contact FSI for assistance with
depressurizing system and equipment.
www.foamsupplies.com
|
www.ecomatetechnology.com
|
1.800.325.4875
Summary of Contents for PROFESSIONAL Series
