X20/X20S and Ethos v1.2.10 User Manual
SBUS:
Allows selection of SBUS-16 channel or SBUS-24 channel mode. Be aware
that all connected SBUS devices have to support the SBUS-24 mode in order to
activate the new protocol. SBUS-24 is an FrSky development of the SBUS-16
Futaba protocol.
Channel Mapping
: The receiver Options dialog also gives the ability to Remap
channels to the receiver pins.
Share
The Share feature provides the ability to move the receiver to another ACCESS
radio having a different Owner Registration ID. When the Share option is tapped,
the receiver green LED turns off.
On target radio B, navigate to the RF System section and Receiver(n) and select
Bind. Note that the Share process skips the Registration step on Radio B, because
the Owner Registration ID is transferred from radio A. The receiver name from the
source radio pops up. Select the name, the receiver will bind and its LED will go
green.
A 'Bind successful' message will pop up.
Tap on OK. Radio B now controls the receiver. The receiver will remain bound to
this radio until you choose to change it.
Press the EXIT button on Radio A to stop the Share process.
The receiver can be moved back to radio A by rebinding it to radio A.
Note: You do not need to use 'Share' if all your radios are using the same Owner ID
/ registration number. You can simply put the radio you want to use in bind mode,
turn on the receiver, select the receiver in the radio and it will bind with that radio.
You can switch to another radio the same way. It is best to keep the model receiver
numbers the same when copying the models.
Reset bind
If you change your mind about sharing a model, select 'Reset bind' to clean up and
restore your bind. Power cycle the receiver, and it will be bound to your
transmitter.
Reset – Receiver
Tap on the Reset button to Reset the receiver back to factory settings and clear the
UID. The receiver is unregistered with X20.
Set Failsafe
90
rev 3
Summary of Contents for TANDEM X20
Page 1: ...X20 and Ethos User Manual...
