X20/X20S and Ethos v1.2.10 User Manual
Name
Allows the flight mode to be named.
Active Condition
When adding a flight mode the default active condition is inactive, i.e ‘---’. Flight modes
may be controlled by switch or button positions, function switches, logic switches, a system
event such as throttle cut or hold, or trim positions.
Note that the default flight mode does not have an active condition parameter, because this
is the flight mode that is always active when no other flight mode is active. The first flight
mode that has its switch ON is the active one.
The active Flight Mode is shown in bold.
Fade In, Out
The times assigned for smooth transitions between flight modes.
Trims
Displays the trim values.
Once programed the flight mode selections are displayed in the mixers. Up to 100 flight modes
can be programmed. Like most functions in ETHOS the user can program descriptive text
Flight Mode names such as Cruise, Speed, Thermal or Normal, Take Off, Landing.
Please note when adding a new flight mode to a model all mixes using flight modes must be
checked for correct operation, because the new flight mode will by default be active in all
49
rev 3
Summary of Contents for TANDEM X20
Page 1: ...X20 and Ethos User Manual...
