X20/X20S and Ethos v1.2.10 User Manual
Throttle Hold
Throttle Hold provides a simple throttle hold function without the throttle input safety
interlock of Throttle Cut above.
Active Condition
The active condition may be chosen from switch or button positions, function switches,
flight modes, logic switches or trim positions.
Value
Once the throttle hold function goes active, the Value setting will be output on the
throttle channel. On electric powered models, the throttle hold value is normally (-
100%).
Flight Modes
If any flight modes have been defined, the mix can be made conditional to one or more
flight modes. Click on ‘Edit’ and check the boxes for the flight modes in which this mixer
line must be active.
Curve
A curve may be defined to modify the throttle channel output. Any previously defined
curve may also be selected.
Weight / Rates
Multiple rates can be defined, subject to a switch position, function switch, logic switch,
trim position or flight mode. A line is added for each rate. The default rate (i.e. first rates
line) is active when none of the other rates are active. There is a small cross inside an
arrow on the left of defined rates that can be used to delete a rates line. In the example
above three rates have been set up on switch SB.
56
rev 3
Summary of Contents for TANDEM X20
Page 1: ...X20 and Ethos User Manual...
