X20/X20S and Ethos v1.2.10 User Manual
The 'Waiting...' message changes to ‘Receiver Connected’, and Rx Name field will be
filled in automatically.
3. At this stage the Reg. ID and UID can be set:
Reg. ID: The Registration ID is at owner or transmitter level. This should be a
unique code for your X20/X20S and transmitters to be used with Smart Share.
It defaults to the value in the Owner Registration ID setting described above at
the start of this section, but can be edited here. If two radios have the same ID
you can move receivers (with the same Receiver No for a given model)
between them by simply using the power on bind process.
RX Name: Filled in automatically, but the name can be changed if desired. This
can be useful if you are using more than one receiver and need to remember
which is bound to which channels.
The UID is used to distinguish between multiple receivers used simultaneously
in a single model. It can be left at the default of 0 for a single receiver. When
more than one receiver is to be used in the same model, the UID should be
changed. Please note that this UID cannot be read back from the receiver, so it
is a good idea to label the receiver.
4. Press [Register] to complete. A dialog box pops up with 'Registration ok'. Press
[OK] to continue.
5. Turn the receiver off. It is now ready for binding.
98
rev 3
Summary of Contents for TANDEM X20
Page 1: ...X20 and Ethos User Manual...
