X20/X20S and Ethos v1.2.10 User Manual
Multi Lipo Sensor
The Multi Lipo sensor allows two lipo sensors to be cascaded for monitoring lipos
greater than 6S.
Name
The sensor name, which may be edited.
Unit
The measurement may be in Volts or mV.
Decimals
The display may be to 0, 1, 2 or 3 decimals.
Range
The range may be from 0 up to a maximum of 50.4V.
Write Logs
Logs will be written to the SD card in the Logs folder if enabled.
Count
The number of lipo sensors to be configured.
LiPo1, LiPo2, to LiPo’n’
Select the lipo sensors in the correct order from low cell to high cell.
To avoid S.Port clashes, the additional lipo sensors must have their IDs altered
using the Lipo Voltage setup tool in the Device Config menu. It is also wise to
125
rev 3
Summary of Contents for TANDEM X20
Page 1: ...X20 and Ethos User Manual...
