33
ICR-01 Smart Receiver / Juno Connect Input Volume Commands*
Syntax:
#AINn[Input, Volume];
Name
Required/Optional
Data Type
Format
Description
n
Required
Constant
1
Denotes the sub-device. Since the
ICR-01 has only one sub device,
this is always 1
Input
Required
Variant
I
Command
where Command is 1-9
Denotes which input volume will
be adjusted
Volume
Optional
Variant
V
Command
where Command is an integer
from 1 to 100, +, or -. The + or
- may be followed by a single
digit (1-9) indicating the change
in volume steps to be made. If
no digit is entered, the volume
will increment by one.
Sets the audio volume to:
• the percentage of maximum
volume corresponding to the
integer used;
• an increase in volume (+) by
n
steps (+
n
); or
• a decrease in volume (-) by
n
steps (-
n
)
Examples:
Set volume of Aux 1 to 15 (50% of maximum): #AIN1[I1,L50];
Increase volume of microphone channel A: #AIN1[I5,L+];
Reduce the volume of microphone channel B: #AIN1[I6,L-];
ICR-01 Smart Receiver / Juno Connect Option Commands*
Syntax:
#OPTn[Parameter, Setting];
Name
Required/Optional
Data Type
Format
Description
n
Required
Constant
1
Denotes the Option. Since the
ICR-01 has only one option
available (OptiVoice), this is always
1
Parameter
Required
Constant
P1
Denotes which paramter is being
set. Since OptiVoice has only one
parameter, this is always 1
Setting
Optional
Variant
I
Command
where Command is an integer
from 1 to 3
Sets the the OptiVoice level to:
• 1 = Low
• 2 = Mid
• 3 = High
Example:
Set OptiVoice to Mid: #OPT1[P1,I2];
Summary of Contents for CB6000
Page 1: ...CB6000 Installer Guide ...