8
MOUNT YOUR TRAY
With the help of a friend, flip the Tray end over end so that it is in the upright position. (The Tray is flipped
end over end so that bolts and brackets do not slide left and right).
With one of you on either side of the Tray, lift the Tray and walk it into position above the vehicle,
approaching from the rear of the vehicle, making sure that the Wind Deflector faces forward.
The Tray Support Brackets should still be loose enough to move. Line the brackets up with the holes on
the roof and fasten them into position using Items 3, 4, 7 &8 (from FAJK005 box).
Centre the Tray from left to right. Use a tape measure to double check. Once you are happy that the Tray
is in the correct position, fasten all nuts and bolts securely, both inside and outside of the vehicle on all
brackets that were installed.
Push the Plastic Nut Caps (Item 9) provided over all the exposed bolts and close up all the roll bar
padding.
Take a step back and admire your work. Good job!
(
)
A
REV_B02