5
REMOVE AND DRILL ROOF...CONT.
Using your drill machine and a 22mm Hole Saw, drill all the
marked holes to 22mm.
There is NO NEED for a lot of downward pressure. Let the
drill do the work. Your job is to keep the drill steady. You
don't want it slipping across your roof and scratching it!
(
)
E
REV_B02
Loosen velcro, unzip and remove the padding covering both roll bars. Remove the foam/styrene padding,
as indicated.
Replace the roof, but do not fasten.
Remove the speaker box so that you have access to the zips and padding that cover the vehicles roll
bars.
This is done by removing the the six bolts that hold it in place. Two bolts on the outside of each speaker
and one bolt either side of the screws that hold the T-tops in place
Remove
Leave
(
)
A
(
)
B
PREP AND INSTALL REAR SUPPORT ARMS
(
FAJK005
)