60
Digital input signals (signals from robot)
Parameters
Signal level:
-
LOW (0) .. 0 - 2.5 V
-
HIGH (1) .. 18 - 30 V
Reference potential: GND = X7/2 or X12/2
NOTE!
All signal states refer to the interface input, not the robot control.
Welding start
The “Welding start” signal starts the welding process. The welding process remains active
while the “Welding start” signal is present.
Exception:
-
The digital "Power source ready" output signal is absent
Pin X2/4
HIGH
