Fronius TPS/i Push, Operating Instructions Manual

Page: 32 / 152

Warning notices
on the device The device is fitted with safety symbols and a rating plate. The safety symbols and rating
plate must not be removed or painted over. The safety symbols warn against operating
the equipment incorrectly, as this may result in serious injury and damage.
40,0006,3035
Caution: Parts may be at welding
voltage
Attention: Les pièces peuvent être
à la tension de soudage
Caution: Parts may be at welding
voltage
Attention: Les pièces peuvent être
à la tension de soudage
24020072
4,049,035
WF 25i R /4R/G/W/FSC
www.fronius.com
Ser.No.:
Part No.:
1.2 A I
11
U
11
60 V
U
12
I
12
0.5 A 24 V
IEC 60 974-5/-10 Cl.A IP 43
1 - 25 m/min 40 - 984 ipm
360A/100% 450A/60% 500A/40% I
2
Do not use the functions described here until you have fully read and understood the fol-
lowing documents:
-
These Operating Instructions
- All the Operating Instructions for the system components, especially the safety rules
Welding is dangerous. The following basic requirements must be met to ensure the
equipment is used properly:
-
Anyone performing automated welding must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved must be kept at a safe distance from the wirefeeder and the
welding process
Do not dispose of used devices with domestic waste. Dispose of them according to the
safety rules.
32