Fronius Selectiva 2060, Operating Instructions Manual

Page: 37 / 64

Settings Below is a detailed description of the "Settings" menu item for the "Charging set-
tings" menu item discussed above. Navigation is performed as described in the
"Configuration mode" section.
A list appears with the following selection options:
The individual selection options are explained in greater detail below:
Electrolyte circulation ("Air pump") - for 3 kW (C1) devices only:
More information on the electrolyte
circulation can be found under
"Electrolyte circulation 3 kW (C1)" in
the "Options" chapter.
The electrolyte circulation cycle is controlled by the battery charger's control
system. A number of selection options are available for this purpose.
The following settings are available for electrolyte circulation:
- Off:
- Electrolyte circulation switched off
- Continuous operation ("continuous"):
- Electrolyte circulation permanently on
- Program 1 to 5:
- Default electrolyte circulation programs and their relevant parameters
can be found in the table under "Settings" in the "Display" chapter.
- Automatic:
- Automatic adjustment of electrolyte circulation flow rate based on the
set battery parameters
- "User" - "On"/"Off":
- Individual setting of the electrolyte circulation
- The settings for "On" and "Off" determine the pulse/pause ratio of the
air flow intervals
Default electrolyte circulation programs and their relevant parameters can be
found in the table below:
Program ON 1 OFF 1 Repeat ON 2 OFF 2
1 30 min 25 min 1 x 5 min 25 min
2 3 min 10 min 4 x 3 min 20 min
3 3 min 12 min 1 x 3 min 12 min
4 5 min 10 min 3 x 5 min 20 min
37
EN