Fronius Selectiva 2060, Operating Instructions Manual

Page: 14 / 64

3 kW
Ladevorgang immer stoppen bevor das Ladekabel abgezogen wird!
Explosive Gase. Flammen und Funken vermeiden.
Während des Ladens für ausreichend Frischluft-Zufuhr sorgen!
Always stop charging before you disconnect the charging cable!
Explosive gases. Prevent flames and sparks.
Provide adequate ventilation during charge!
Toujours arrêter la charge avant de déconnecter le câble de charge!
Gaz explosifs. Éviter les flammes et les étincelles.
Prévoir une ventilation adaptée pendant la charge!
¡Detener siempre la carga antes de desconectar el cable de carga!
Gases explosivos. Evitar llamas y chipas.
¡Mantener una ventilación adecuada durante la carga!
Interrompere sempre la carica prima di scollegare il cavo di carica!
Gas esplosivi. Evitare fiamme libere e scintille.
Predisporre una ventilazione adeguata durante la carica!
WARNUNG - WARNING - ATTENTION
ADVERTENCIA - AVVISO
42,0409,0419
Selectiva xxxx xkW
4,010,xxx
xxxxxxxx
xxxxxxxx
XXX
X
WARNING
Explosive gases. Prevent flames and sparks.
Provide adequate ventilation during charge!
Always stop charging before you disconnect the charging cable!
OVC II
U
AC nom.
I
AC max.
P
AC max.
U
DC nom.
I
DC max.
Part No.:
Ser. No.:
Protective class I IP21
1~ NPE 230V 50/60Hz
xxA
xxV
xxxxW
xxA
www.fronius.com
Do not dispose of used devices with domestic waste. Dispose of them
according to the safety rules.
Possible sources of ignition, such as fire, sparks and naked flames,
must be kept away from the battery.
Risk of explosion! Oxyhydrogen is generated in the battery during char-
ging.
Battery acid is corrosive and MUST be kept away from eyes, skin and
clothes.
Ensure an adequate supply of fresh air during charging.
Do not use the functions until you have read all the Operating Instruc-
tions.
Warning notices
inside the device
WARNING!
Danger from electric shocks.
This can result in serious injury or death.
▶
The housing must never be opened by anyone other than a service technician
trained by the manufacturer.
▶
The device must be disconnected from the grid before starting any work with
the housing open. A suitable measuring instrument must be used to ensure
that electrically charged components (e.g. capacitors) are fully discharged.
▶
Use an easily legible and understandable warning sign to ensure that the
device is not reconnected to the grid before all the work has been com-
pleted.
14