Fronius Selectiva 2060, Operating Instructions Manual

Page: 36 / 64

3
Use the "Up/Down" keys to select the desired parameter (e.g. "Cells").
4
Use the "Pause/Start" key to confirm the parameter.
5
Use the "Up/Down" keys to set the desired value (e.g. "24" for the number of
battery cells).
6
Use the "Pause/Start" key to confirm what you have entered.
If one or more relevant settings are changed for the charging process in configur-
ation mode, you will once again be prompted to confirm acceptance of the
changed settings when exiting configuration mode.
The following settings need to be confirmed when exiting configuration mode:
- Characteristic
- Battery capacity in Ah (excluding the RI characteristic)
- Number of cells
- Equalising charge ON/OFF
- CAN protocol
Example:
Changing the characteristic from 3 -
UI (Pb-WET) to 6 - RI (Pb-WET).
If the setting is not confirmed, the
charger returns to configuration mode
and the setting can be changed to the
desired value.
36