Fronius Selectiva 2060, Operating Instructions Manual

Page: 15 / 64

Inside the device:
2 kW (B1)
4,010,xxx
xxxxxxxx
XXXX
U
DC nom.
xxV
Part No.:
Ser. No.:
1
2
1 Display
2 Battery CR2032
Ext. Start Stopp (1)
Temperature
controlled charging
Not connected (3)
CAN High (5)
(4) Not connected
(6) CAN Termination
(8) CAN Termination
(10) +13V
(2) Ext. Start Stopp
Temperature
controlled charging
CAN Low (7)
CAN GND (9)
WARNING
Hazardous Voltage
Kondensator Entladezeit < 2 min.
Capacitor discharge time < 2 min.
Décharge de condensateur < 2 min.
Condensador tiempo de descarga < 2 min.
Condensatore tempo di scaricamento < 2 min.
3 kW (C1)
4,010,xxx
xxxxxxxx
XXXX
U
DC nom.
xxV
Part No.:
Ser. No.:
1 2
1 Display
2 Battery CR2032
Ext. Start Stopp (1)
Temperature
controlled charging
Not connected (3)
CAN1 High (5)
CAN1 Low (7)
CAN1 GND (9)
Status 1 (11)
Status 3 (13)
(4) Not connected
(6) CAN2 High
(8) CAN2 Low
(10) +13V
(12) Status 2 / CAN2 GND
(14) Status 4
(2) Ext. Start Stopp
Temperature
controlled charging
WARNING
Hazardous Voltage
Kondensator Entladezeit < 2 min.
Capacitor discharge time < 2 min.
Décharge de condensateur < 2 min.
Condensador tiempo de descarga < 2 min.
Condensatore tempo di scaricamento < 2 min.
Setup regula-
tions
WARNING!
Danger from machines falling or toppling over.
This can result in serious injury and damage to property.
▶
Make sure that all system components are securely in position when setting
them up.
▶
If using a floor bracket or wall bracket, always make sure that all the fasten-
ings are secure.
The device is tested to "Degree of protection IP21", meaning:
- Protection against penetration by solid foreign bodies with diameters ex-
ceeding 12.5 mm (0.49 in.)
- Protection against vertically falling drops of water
The device can be set up and operated in dry, closed areas that comply with de-
gree of protection IP21. Exposure to wet conditions should be avoided.
The device may only be operated in a
horizontal position.
15
EN