Fronius Robacta Reamer V Twin, Operating Instructions Manual

Page: 4 / 92

Cleaning position of the welding torch with externally routed coolant lines 36
Cleaning position of the welding torch with internally routed coolant lines 36
Fitting the clamping system for welding torches with internally routed coolant lines 37
Tools required 37
Removing the existing clamping system 37
Fitting the Twin clamping system 38
Adjusting the lifting device 41
Adjusting the lifting device 41
Installing the compressed air supply 43
Establishing the compressed air supply for the cleaning device, function of the com-
pressed air relief valve 43
Starting up the parting agent nebuliser 44
Fill parting agent container (1 litre) and connect to the cleaning device 44
Connect the parting agent container (10 litres) to the cleaning device 45
Adjusting the parting agent nebuliser spray amount 46
Using the fill-level control sensor 47
Optional fill-level control sensor 47
Controls and indicators on the sensor 47
Installation adapter borehole dimensions 47
Fitting the fill-level control sensor 48
Calibrating the empty state 49
Calibrating the full state 49
Locking/unlocking the fill-level control sensor 50
Electrical connection 50
Manually checking the cleaning device functions 51
Safety 51
Checking functions manually 51
Starting up the cleaning device 53
Prerequisites for start-up 53
Start-up 53
Cleaning programme 54
Safety 54
Cleaning program sequence - overview 55
1. Wire cutter 56
2. "Parting agent level" query (option) 57
3. "Cleaning motor lowered" query 58
4. "Gas nozzle free" query 59
5. Cleaning 60
Signal waveform for cleaning 65
Signal inputs 65
Signal outputs 65
Signals not defined using time 66
Signal waveform: wire cutter (inputs and outputs) 66
Care, maintenance and disposal 67
Safety 69
Safety 69
Care, maintenance and disposal 71
General 71
Before each start-up 71
Daily 71
Weekly 71
Every 6 months 71
As necessary 71
Disposal 72
Adjust the swivel mechanism stop angle 73
General 73
Preparatory work 73
Adjust the swivel mechanism stop angle 74
And finally... 75
4