Fronius Robacta Reamer V Twin, Operating Instructions Manual

Page: 31 / 92

Before commissioning
Proper use The cleaning device is to be used exclusively for cleaning Fronius robot welding
torches, especially the gas nozzle and its interior, in automatic mode and within
the scope of the technical data. Any use above and beyond this purpose is
deemed improper. The manufacturer shall not be held liable for any damage
arising from such usage.
Proper use includes:
- carefully reading these operating instructions
- following all the instructions and safety rules in these operating instructions
- performing all stipulated inspection and maintenance work
Operators, main-
tenance person-
nel
WARNING!
Risk of machines starting automatically.
This can result in serious injury and damage to property.
▶
The device must only be used by 1 person at a time. It is also necessary to
ensure that no one else is within the working area of the device when the
device is being used.
▶
The device must only be serviced by 1 person at a time. It is also necessary to
ensure that no one else is within the working area of the device when the
device is being serviced.
Setup regula-
tions The cleaning device is tested to protection class IP 21, meaning:
- Protection against penetration by solid foreign bodies with diameters > 12.5
mm (0.49 in.)
- No protection against the ingress of water
The device must not be set up and operated outdoors. The built in electrical
parts must be protected from direct wetting.
WARNING!
Danger from machines falling or toppling over.
This can result in serious injury and damage to property.
▶
Always secure the cleaning device to the underlying surface.
Compressed air
supply specifica-
tions To ensure that the cleaning device functions correctly, the following compressed
air supply specifications must be met:
- Establish compressed air supply using a pressure limiter and compressed air
filter
- Provide compressed air quality conforming to ISO 8573-1:2001, class 7 4 3,
instrument air
-
Solid particle concentration
£
10 mg/m
3
- Vapour pressure dew point
£
+ 3°C
-
Oil concentration
£
1 mg/m
3
31
EN