Fronius Robacta Reamer V Twin, Operating Instructions Manual

Page: 24 / 92

Robacta Reamer V Twin control elements, con-
nections and mechanical components
Control ele-
ments, connec-
tions and mech-
anical compon-
ents
(7)
(6)
(1)
(2)
(3)
(4)
(5)
Side view
(8)
(13)
(9)
(12)
(10)
(11)
Front view
(1) Standard I/O connection socket (X1)
For a + 24 V DC supply
CAUTION!
Danger from overcurrent.
Damage to the standard I/O (X1) connection supply may result.
▶
Secure supply against overcurrent with a 500 mA slow-blow fuse.
(2) Compressed air connection
For a compressed air supply at 6 bar (86.99 psi)
Compressed air connection thread identification: G ¼"
(3) "Clamp gas nozzle/Cleaning motor on" screw
For manually checking the gas nozzle clamping device and the cleaning
motor (gas nozzle clamping device extends/retracts, cleaning motor
off/on)
(4) "Lifting device up/down" screw
For manually checking the lifting device (lifting device moves up/down)
(5) "Spray parting agent" screw
For manually checking the spray device (compressed air or compressed
air/parting agent mixture is sprayed out of the parting-agent injection
nozzle)
(6) Parting agent adjuster
For setting the amount of parting agent applied
(7) Parting agent container
(8) Lifting device
Lifts the cleaning motor and the cleaning cutter when cleaning the inside
of the gas nozzle
24