Fronius LaserHybrid, Operating Instructions/Spare Parts List

Page: 84 / 184

84
NOTE!
Risk of components coming apart.
Loosen the four fastening screws but ensu-
re there is still no discernible play and the
parts are still noticeably held together.
Slightly loosen the four 5 mm fastening
screws on the optics system holder (7)
NOTE!
Risk of components coming apart.
Loosen the four 5 mm cheese head screws
(8) but ensure there is still no discernible
play and the parts are still noticeably held
together.
Slightly loosen the four 5 mm cheese
head screws (8) on the optics system
holder
Setting the focus
point in the x- and
y-axes
Adjusting screws - left-hand view Adjusting screws - right-hand view
Use adjusting screws (9), (10) and (11) to bring the focus of the pilot laser into the centre
of the crosshairs (1), as outlined in the following description:
(7) (7)
5
(8)
(8)
(8)
(8)
6
(11) (9) (10) (11)