Fronius LaserHybrid, Operating Instructions/Spare Parts List

Page: 68 / 184

68
Safety inspection The operator is obliged to have the LaserHybrid head checked by a qualified electrician to
ensure it is safe for use after any modifications, alterations, repairs, care and maintenance,
and in any case at least every twelve months.
Alterations Do not carry out any modifications, alterations, etc. to the LaserHybrid head without the
manufacturer's consent.
Components that are not in perfect condition must be replaced immediately.
Replacement and
wearing parts Use only original spare and wearing parts (also applies to standard parts).
It is impossible to guarantee that parts sourced from third parties are designed and manu-
factured to meet the demands made of them, or that they satisfy safety requirements.
When ordering, please give the exact designation and part number as shown in the spare
parts list, as well as the serial number of your device.
Calibration of
power sources In view of international standards, regular calibration of power sources is necessary. Fro-
nius recommends a 12-month calibration interval. For more information, please contact
your service centre.
CE marking The LaserHybrid head fulfils the fundamental requirements of the Low Voltage Directive
and the Electromagnetic Compatibility Directive and is thus CE-marked.
Copyright Copyright of these operating instructions remains with the manufacturer.
The text and illustrations are all technically correct at the time of printing. We reserve the
right to make changes. The contents of the operating instructions shall not provide the ba-
sis for any claims whatsoever on the part of the purchaser. If you have any suggestions for
improvement, or can point out any mistakes that you have found in the instructions, we will
be most grateful for your comments.
Regulation Title
IEC (EN) 60 974-1 Arc welding equipment - Part 1: Power sources
BGV A2, §5 Electrical plant and equipment
BGV D1, §33 / §49 Welding, cutting and associated processes
VDE 0701-1 Repair, modification and inspection of electrical appliances;
general requirements
VDE 0702-1 Repeat tests on electrical equipment