Fromm FS380, Use And Maintenance Manual, Page: 89 / 100

Fromm
83
STARTING UP THE MACHINE
83
6.2.3 CYCLE STOP
6.2.4 STOPPING THE MACHINE AFTER USE
6.2.5 EMERGENCY STOP
3
6
4
1
8
7
2
5
Press STOP (O) on the operator terminal to stop machine at the end of
its current cycle.
»
See Picture 60 - pag. 83
After using the machine, even for short periods of inactivity, it must be
put into the safe mode.
A) Lower the turntable down to the ground (1) .
B) Switch off the machine by turning the main power switch (2) to
‘O’-OFF position.
C) Remove the pallet from the turntable (5) .
»
See Picture 60 - pag. 83
The machine is equipped with an emergency pushbutton (8) . Pressing
the pushbutton, the machine will stop immediately. To restart the
machine it is necessary to turn the pushbutton to rearm and press the
button to reactivate the control panel.
Picture 60