Fromm FS380, Use And Maintenance Manual, Page: 60 / 100

54
Rev.2 01/03/2021
Use and Maintenance Manual | TURNTABLE - MAST
54
4 TRANSPORT-HANDLING-STORAGE
4.1 PACKING AND UNPACKING
The machine may be shipped in different ways depending on the
transport requirements:
- Machine on a wooden pallet and protected by transparent plastic
wrapping.
-
Machine packed in a wooden crate of suitable dimensions.
- Machine on wooden base and protected by a cage of wooden
crossbars.
Upon receipt, check that the packaging has not been damaged during
transport or that it has not been tampered with and parts removed.
Move the packed machine as close as possible to the place of installation
and start unpacking, carefully checking that the supply corresponds to
the order specifications.
DANGER
The lifting and transport means must be chosen based on the
size, weight and shape of the machine and its components. The
capacity of the lifting equipment must be greater (with a safety
margin) than the weight of the components to be transported.
N.B. : If damaged or missing parts are found, immediately notify Customer
Service and the carrier, providing photographic documentation.
Make sure that no small parts are left in the packaging.
Make a detailed examination of the general conditions of the machine.
The various packing materials must be disposed of in accordance with
current environmental protection regulations.
WARNING
During unloading and handling operations, an assistant must be
on hand to give any necessary directions during transport.
WARNING
THE MANUFACTURER declines all responsibility for damage
caused by incorrect operations, unqualified personnel or the use
of unsuitable means.