manualshive.com logo in svg

Fromm FS380, Use And Maintenance Manual, Page: 12 / 100

Share
Download
Fromm FS380 Use And Maintenance Manual Download Page 12

6

Rev.2  01/03/2021

Use and Maintenance Manual | TURNTABLE - MAST

6

1.2 

WHO THE MANUAL IS FOR

MACHINE OPERATOR:

Operator who, after an appropriate training course in the use of the 

machine, is able to make the simplest adjustments.

MECHANICAL MAINTENANCE TECHNICIAN:
Qualified  technician  able  to  operate  the  machine  like  the  machine 

operator  and  work  on  the  mechanical  devices  for  adjustment, 

maintenance  and  repair.  The  mechanical  maintenance  technician  is 

not qualified to perform operations on live electrical systems.

MAINTENANCE ELECTRICIAN:
Qualified  technician  able  to  operate  the  machine  like  the  machine 

operator,  make  adjustments  and  work  on  electrical  systems  for 

maintenance and repair.

SPECIALISED TECHNICIAN OF THE MANUFACTURER:
Qualified  technician  of  the  manufacturer  or  his  distributor  able  to 

operate the machine like the machine operator, work on the mechanical 

devices  and  on  the  electrical  system  for  adjustments,  maintenance, 

repairs and complex operations when agreed with the user.

EXPOSED PERSON:

Any person partially of fully in a hazardous zone.

Summary of Contents for FS380





































































































Reviews:

No comments