Fromm FS380, Use And Maintenance Manual, Page: 35 / 100

Fromm
29
MACHINE DESCRIPTION
29
FE (EB) carriage
2
1
A
5
4
A
4
A
Clockwise plate rotation Anti-clockwise plate
rotation
»
See Picture 17 - pag. 29
With this carriage version, the application tension of the film on the
pallet can be adjusted.
The
FE carriage is made up of a rubber idle roller (1) and a roller (2)
equipped with an electromagnetic brake.
Setting F13-16 (F32) functions in the control panel is used to adjust the
action of the brake and, consequently, the tension of the film.
Upon starting, the film must be loaded onto the carriage:
• Put the carriage into the Down position to make fitting the roll
easier.
• Turn the main switch to the ‘O’-OFF position.
• Push the roll (4) onto the centre pin (5) .
• Insert the film between the rollers following the path indicated
in figure (A) , the symbol with the triangles identifies the side of
the film to which the bonding agent (if present) is applied.
• Diagram (A) is also attached to the carriage.
Picture 17