manualshive.com logo in svg

Fromm FS380, Use And Maintenance Manual, Page: 55 / 100

Share
Download
Fromm FS380 Use And Maintenance Manual Download Page 55

Fromm

49

MACHINE DESCRIPTION

49

3.5 

UNINTENDED AND UNAUTHORISED USE 
- FORESEEABLE AND UNFORESEEABLE 
IMPROPER USE

Use  of  the  pallet  wrapping  machine  for  unauthorised  purposes,  its 

improper use and lack of maintenance can lead to the risk of serious 

danger to health and safety of operators and exposed persons, as well 

as affecting the working efficiency and safety of the machine.
The following is a list of some possible, reasonably more foreseeable, 

examples of “bad usage” of the machine.

 

-

NEVER allow anyone to climb onto the turntable.

 

-

NEVER start the work cycle when there is anyone in the immediate 

vicinity of the machine.

 

-

NEVER allow the machine to be used by unauthorised persons or by 

minors under the age of 16.

 

-

NEVER leave the control station during the working process.

 

-

NEVER load onto the machine containers that have toxic, corrosive, 

explosive or flammable products.

 

-

NEVER start the work cycle if the load is not centred properly on the 

turntable.

 

-

NEVER start the work cycle if the product loaded is tied outside the 

machine.

 

-

NEVER  use  the  machine  outdoors  or  under  not  permitted 

environmental conditions. 

Summary of Contents for FS380





































































































Reviews:

No comments