Once the update is complete, a message will appear that you can remove the stick
❒ Remove the USB stick
❒ Close the USB cover cap on the barrel
➥ The cap must click into place
❒ Tap the touch screen
After restarting the display will start calibrating.
Once the calibration is complete, it will restart again to finish. The touch control
software is now up to date.
NOTICE
Inaccurate calibration
If you do not tap the indicated points accurately, the control may stop working
properly and a software update may be required.
FAQ
7
Updating the software of the touch control
Operating Instructions RBG 3200 Touch | B0780115_en
39