Setting another mode:
❒ Tap the mode icon
➥ Mode-select is displayed
❒ Tap the appropriate icon to change the heating circuit mode
The following modes are available:
4.6.1 “OFF” mode
The allocated heating circuit is switched off, the frost protection function remains
active.
4.6.2 “Auto” mode
The allocated heating circuit and the allocated DHW tank are controlled according to
the timed program settings.
4.6.3 “Party” mode
The allocated heating circuit is set to heating mode until the end of the next heating
phase or until a different mode is activated.
4.6.4 “Setback” mode
The allocated heating circuit is set to setback mode until the start of the next heating
phase or until a different mode is activated. The temperature setpoint displayed in
setback mode on the basic screen is for display purposes only and cannot be
changed. To change this, go to the “Heating” menu → under the “Temperature” tab.
4
Operation
Set the heating circuit mode
16
Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
