FRIZZLIFE INC.
www.frizzlife.com
Page 16
Please check if the adapter is connected
properly.
Please contact customer service team.
Maybe you have plugged the power cord into
the socket specially designed for garbage
disposal, please change another socket.
The system is not connected
tothe power adapter or the
connection is loose.
The panel is damaged or it’ s
cable is loose.
Wrong power source
Indicators on
user interface
disappear
System is not
turn on after
power on
Why there are many white bubbles in the water?
Why TDS is higher at the beginning, but back to normal range after about
one minute?
Normally for the first time use of the RO system, the water seems to have
white bubbles in it, which is normal and totally drinkable. It is because
when the pump is pressurizing the water, it will pressurize the air at the
same time. It will make the air molecules smaller, thus the solubility further
increases. The air can’ t be released at that time because of the pressure
in the RO system. However, when you turn on the tap to get a cup of water,
the pressure of air is released. So you will see a huge number of bubbles in
the water. It looks cloudy and white, but they are just bubbles. After you put
the water still for a while, all bubbles will be gone, the water is totally good
for drinking.
Osmosis is a natural phenomenon happens in all RO system, no matter if you
have a conventional RO system or tankless RO system. When the RO system
starts to work, pressure from the pump overcomes natural osmotic pressure,
forcing feed water through the RO membrane that removes the impurities.
When the RO system stops working, the pump stops offering pressure as well.
At that time, because of different concentrations, a small fraction of ions will
enter into pure water and cause TDS to rise by a small amount. However,
even if the TDS reading is a little high at the beginning, the quality water is still
unbeatable by any other filtration methods including carbon, KDF, ceramic,
UF, UV, etc.. The water is totally good to drink and you don’ t have to wait for
about 1 minute to get the water, since the whole system will not release any
harmful substances to the water. The TDS removing rate for PD1000 is about
94-95%, if your incoming TDS is high, the outlet TDS will be high too.
12. Frequently Asked Questions
Q:
Q:
Model: PD1000-TAM4
