Fig.1
Fig.2
Fig
.
3
Fig
.
4
Fig
.
6
!
Note: If the cold water pipe is 1/2", please connect one part of converter
to the angle valve and connect another part of converter to the pipe
before proceeding to the next step. (see Fig.6)
Please cut the 3/8" tubing in proper length, make sure cut them squarely
and cleanly. (Fig
.
1)
Put one end of the tubing into boiled water for 5 seconds to soften itself.(Fig
.
2)
Load the 3/8" tubing through the nut. (Fig.3)
Connect the end of 3/8" tubing that has been softened into the 3-way feed
water valve. Make sure push and squeeze the tubing to the very end.(Fig.4)
Use a wrench to tighten the nut, please do not over tighten. (Fig.5)
Step 1: Cut and Soften the 3/8" tubing
Step 2: Connect three-way feed water valve (3/8" or 1/2")
FRIZZLIFE INC.
www.frizzlife.com
Page 4
Fig
.
5
Model: PD1000-TAM4
