FRIZZLIFE INC.
www.frizzlife.com
Page 13
Fig
.
42
Fig
.
43
Fig
.
44
Step 2: Reset the filter lifetime
Turn on the faucet to discharge the filtered water. If you replace the RO
membrane, please do not use the water in the first 20 minutes. If you
replace other cartridges, please do not use the water in the first 10 minutes.
Step 3: Flush the filter
If you don't use the system for a long time:
A. If the system has not been used for more than 2 days, please turn on the
faucet and discharge the filtered water at least 5 minutes before usage.
B. If the system will not be used for more than 1 week, please seal the filter
cartridges and store them in the refrigerator but do not put them in the
freezer. Discharge filtered water for at least 10 minutes before next time
usage.
C. If the system will be not used for a long time, please cut off the water supply,
cut off the power and turn on the handle of the faucet to release the internal
pressure and avoid damage to the system.
10. Maintenance
Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection.
Model: PD1000-TAM4
Long press the "Reset" button for 3 seconds, the buzzer will beep and you
can start to select the filter you want to change.
Press "Reset"button to change between the filters and the selected filter
lifetime indicator will flash.
After selecting the filter, long press "Reset" button for 3 seconds. You will hear
a beep. The selected filter's indicator will return to white light, which means the
filter is successfully reset. If you do not operate within 10 seconds, it will
automatically exit this mode and resume normal display.
